Shop
Original price was: $2,299.00.$1,999.00Current price is: $1,999.00. incl GST
Original price was: $1,799.00.$1,499.00Current price is: $1,499.00. incl GST
$255.00 incl GST
A sensor to dynamically adjust the current supplied to the EV to avoid overloading
Original price was: $1,490.00.$790.00Current price is: $790.00. incl GST
A cost effective charger perfect for home use for both indoors and outdoors with clever features for your safety and usability.
Coneva’s SmartBox offers an intelligent load control solution for EV charging that ensures decentralized and remote-controlled operation of charging infrastructure in a fail-safe manner. By serving as a local gateway on-site, the SmartBox optimizes EV charging, providing a safe, reliable, and efficient charging experience for EV drivers. With Coneva’s SmartBox, businesses and individuals can take advantage of advanced technology to manage their EV charging infrastructure and improve their environmental impact.
The Chargespot Berlin – a compact, cost effective, smart public charging solution designed to be easily mounted on streetlights, walls and similar street furniture.
Original price was: $379.00.$349.00Current price is: $349.00. incl GST
Maximum flexibility for charging your vehicle everywhere.Type 2 charging cables from MENNEKES enable you to connect any vehicle with a type 2 plug connector to a public charging station or a Wallbox charging station with a charging outlet.Plug and socket vehicle sidetype 2 (IEC 62196-2)Plug and socket infrastructure sidetype 2 (IEC 62196-2)Communication with vehicleIEC 61851 Mode 3Standard charging cableIEC 62752IP44 for outdoor and indoor useCompatible with the following plug-in vehicles with a type 2 socket:
- Audi – All plug in vehicles
- BMW – All plug in vehicles (BMW i, BMW 330e, BMW 530e…)
- BYD – Atto3
- Hyundai Ioniq, Ioniq 5, Ioniq 6
- Hyundai Kona
- Kia Optima PHEV
- Kia Niro
- Kia EV6
- LDV – All electric variants
- Mercedes – All plug in vehicles (B 250 e, C 350 e, E 350 e..)
- MINI – All plug in vehicles
- Nissan LEAF (after 2018)
- Porsche – All plug in vehicles
- Renault Zoe
- Smart
- Tesla Model S
- Tesla Model Y
- Tesla Model X
- Volkswagen – All plug in vehicles
- Volvo – All plug in vehicles
Original price was: $399.00.$369.00Current price is: $369.00. incl GST
Maximum flexibility for charging your vehicle everywhere.Type 2 charging cables from MENNEKES enable you to connect any vehicle with a type 2 plug connector to a public charging station or a Wallbox charging station with a charging outlet.Plug and socket vehicle sidetype 2 (IEC 62196-2)Plug and socket infrastructure sidetype 2 (IEC 62196-2)Communication with vehicleIEC 61851 Mode 3Standard charging cableIEC 62752IP44 for outdoor and indoor useCompatible with the following plug-in vehicles with a type 2 socket:
- Audi – All plug in vehicles
- BMW – All plug in vehicles (BMW i, BMW 330e, BMW 530e…)
- BYD – Atto3
- Hyundai Ioniq, Ioniq 5, Ioniq 6
- Hyundai Kona
- Kia Optima PHEV
- Kia Niro
- Kia EV6
- LDV – All electric variants
- Mercedes – All plug in vehicles (B 250 e, C 350 e, E 350 e..)
- MINI – All plug in vehicles
- Nissan LEAF (after 2018)
- Porsche – All plug in vehicles
- Renault Zoe
- Smart
- Tesla Model S
- Tesla Model Y
- Tesla Model X
- Volkswagen – All plug in vehicles
- Volvo – All plug in vehicles
$995.00 incl GST
An essential tool for ensuring the electrical safety and proper functionality of your EVSE, especially when used with compatible METREL installation testers. Specifically designed for testing Mode 3 EV supply equipment with a type 2 connector, the XA version can handle 3 phase load testing up to 13 A and detect various error types, including PE open.
$3,739.00 incl GST
The newest flagship of Metrel’s advanced line of multi-functional instruments for industrial testing. What sets this instrument apart is its ergonomic design and intuitive user interface, featuring a memory organizer and fully programmable AUTO SEQUENCEs, all managed through a large colour touch screen display.KEY FEATURES
• Programmable AUTO SEQUENCEs. *• Predefined profile dependent AUTO SEQUENCEs.
• Predefined Automatic tests: Auto TT (U, Zln, Zs, Uc); Auto TN/RCD (U, Zln, Zs, Rpe); Auto TN (U, Zln, Zlpe, Rpe); Auto IT (U, Zln, Isc, Isfl, IMD).
• High resolution colour touch screen, 4.3” TFT.
• Functional inspections.
• Visual inspections.
• Custom inspections (visual and functional) which may be incorporated into AUTO SEQUENCEs.
• EVSE AUTO SEQUENCEs and function inspections. • Machine functional and visual inspections.
• Built-in help screens for referencing on site.
• Built-in fuse tables for automatic evaluation of the line / loop impedance result.
• Monitoring of all 3 voltages in real-time.
• Automatic polarity reversal on continuity test.
• Automated RCD testing procedure (RCD AUTO).
• Automated Impedance testing procedure (Z AUTO).
• Measurement filtering according to the selected area group.
• Built-in charger and rechargeable batteries as standard accessory.
• BT communication with PC, Android tablets and smart phones via built-in BT.• PC SW Metrel ES Manager (structure and report creation, data upload/download). *
• Optional aMESM Android app
(structure and report creation, data upload/download). MEASURING FUNCTIONS
• Live Transformer’s Impedance Measurement with Four Wire Test; • Hi-precision Short Circuit Current evaluation with Calculated Hot factor; • 3-wire test of PE (RPE function) without extension lead conductor; • Autotest insulation function between L-N, N-PE and L-PE (R ISO ALL function); • 4 wire continuity test; • Insulation resistance with DC voltage from 50 V to 2500 V and PI, DAR calculation; • Varistor test;• Continuity of PE conductors with 200 mA DC test current with polarity change; • Continuity of PE conductors with 7 mA test current without RCD tripping; • 2-wire and 3-wire high-current loop impedance (L-PE) measurement; • 3-wire loop impedance (L-PE) measurement with Trip Lock RCD function; • Touch voltage / Contact voltage measurement with external P/S probe. • 2-wire and 3-wire line impedance (L-L, L-N) measurement; • 1-phase / 3-phase TRMS voltage and frequency measurements; • Line, loop and RCD measurements at frequency range 16 … 400 Hz; • Phase sequence;• Power and THD measurement (up to the 12th harmonic); • RCD testing (general and selective, type AC, A, F, B, B+, MI RCD, EV RCD, PRCD, PRCD-K, PRCD-S); • Earth resistance (3-wire and 2-clamps method); • Specific earth resistance with Ro-adapter (option); • TRMS leakage and load currents (option); • First fault leakage current (ISFL); • Testing of Insulation Monitoring Devices (IMDs);
• Machine mode support with time discharge; • Illumination (option); • High resolution Loop impendance (mΩ) (option);
• EVSE (Electrical Vehicle Supply Equipment)
support (option); • Determining location of cables (option); • QR and/or barcode scanner support (option).
• Programmable AUTO SEQUENCEs. *• Predefined profile dependent AUTO SEQUENCEs.
• Predefined Automatic tests: Auto TT (U, Zln, Zs, Uc); Auto TN/RCD (U, Zln, Zs, Rpe); Auto TN (U, Zln, Zlpe, Rpe); Auto IT (U, Zln, Isc, Isfl, IMD).
• High resolution colour touch screen, 4.3” TFT.
• Functional inspections.
• Visual inspections.
• Custom inspections (visual and functional) which may be incorporated into AUTO SEQUENCEs.
• EVSE AUTO SEQUENCEs and function inspections. • Machine functional and visual inspections.
• Built-in help screens for referencing on site.
• Built-in fuse tables for automatic evaluation of the line / loop impedance result.
• Monitoring of all 3 voltages in real-time.
• Automatic polarity reversal on continuity test.
• Automated RCD testing procedure (RCD AUTO).
• Automated Impedance testing procedure (Z AUTO).
• Measurement filtering according to the selected area group.
• Built-in charger and rechargeable batteries as standard accessory.
• BT communication with PC, Android tablets and smart phones via built-in BT.• PC SW Metrel ES Manager (structure and report creation, data upload/download). *
• Optional aMESM Android app
(structure and report creation, data upload/download). MEASURING FUNCTIONS
• Live Transformer’s Impedance Measurement with Four Wire Test; • Hi-precision Short Circuit Current evaluation with Calculated Hot factor; • 3-wire test of PE (RPE function) without extension lead conductor; • Autotest insulation function between L-N, N-PE and L-PE (R ISO ALL function); • 4 wire continuity test; • Insulation resistance with DC voltage from 50 V to 2500 V and PI, DAR calculation; • Varistor test;• Continuity of PE conductors with 200 mA DC test current with polarity change; • Continuity of PE conductors with 7 mA test current without RCD tripping; • 2-wire and 3-wire high-current loop impedance (L-PE) measurement; • 3-wire loop impedance (L-PE) measurement with Trip Lock RCD function; • Touch voltage / Contact voltage measurement with external P/S probe. • 2-wire and 3-wire line impedance (L-L, L-N) measurement; • 1-phase / 3-phase TRMS voltage and frequency measurements; • Line, loop and RCD measurements at frequency range 16 … 400 Hz; • Phase sequence;• Power and THD measurement (up to the 12th harmonic); • RCD testing (general and selective, type AC, A, F, B, B+, MI RCD, EV RCD, PRCD, PRCD-K, PRCD-S); • Earth resistance (3-wire and 2-clamps method); • Specific earth resistance with Ro-adapter (option); • TRMS leakage and load currents (option); • First fault leakage current (ISFL); • Testing of Insulation Monitoring Devices (IMDs);
• Machine mode support with time discharge; • Illumination (option); • High resolution Loop impendance (mΩ) (option);
• EVSE (Electrical Vehicle Supply Equipment)
support (option); • Determining location of cables (option); • QR and/or barcode scanner support (option).
$2,854.00 incl GST
An essential multifunctional tool for testing electrical installations, including EV chargers.